A list of the contents of this article:

Culture methods and matters needing attention of rubber trees

The growth of rubber trees needs sufficient light, but it is also shade-resistant, so indoor maintenance should be placed near the south-facing window with sufficient light and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and wet basin soil are easy to cause root rot. Family cultivation is generally moved to outdoor maintenance from late April to early October every year, and shade is needed at noon in hot summer.

Rubber trees need plenty of light to grow, but they are also more shady. Therefore, indoor maintenance should be placed in a place with sufficient light near the south-facing window, and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and humid basin soil can easily lead to root rot. Four seasons management method-spring management: change the basin when the temperature is stable at about 15 ℃ in spring every year, and trim it properly before changing the basin. Keep the basin soil moist and often spray water to increase air humidity.

The cultivation methods and matters needing attention of rubber trees although they like the humid environment, they are not resistant to waterlogging, so it is necessary to choose a matrix with good air permeability and water permeability when selecting soil substrates. 3 parts of rotten leaf soil, 3 parts of garden soil, 3 parts of river sand and 1 part of base fertilizer can be used. Base fertilizer can use mature bean cake fertilizer, peanut cake fertilizer and so on.

It should be noted that the suitable temperature for rubber tree growth is 2530 ℃. If it is lower than 3 ℃ in winter, the leaves will turn yellow and fall off. Therefore, it should be kept indoors in a sunny place in winter and keep the room temperature above 10 ℃. When more than 35 ℃ in summer, the plant should be moved to a cool and ventilated place for maintenance, and timely water spray to cool down. Rubber tree is a plant of Moraceae, the whole plant contains milk. Therefore, it is necessary to apply charcoal powder immediately after each pruning, so as not to flow out too much juice and cause water loss and death.

Culture methods and matters needing attention of rubber trees

The growth of rubber trees needs sufficient light, but it is also shade-resistant, so indoor maintenance should be placed near the south-facing window with sufficient light and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and wet basin soil are easy to cause root rot. Family cultivation is generally moved to outdoor maintenance from late April to early October every year, and shade is needed at noon in hot summer.

Rubber trees need plenty of light to grow, but they are also more shady. Therefore, indoor maintenance should be placed in a place with sufficient light near the south-facing window, and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and humid basin soil can easily lead to root rot. Four seasons management method-spring management: change the basin when the temperature is stable at about 15 ℃ in spring every year, and trim it properly before changing the basin. Keep the basin soil moist and often spray water to increase air humidity.

The cultivation methods and matters needing attention of rubber trees although they like the humid environment, they are not resistant to waterlogging, so it is necessary to choose a matrix with good air permeability and water permeability when selecting soil substrates. 3 parts of rotten leaf soil, 3 parts of garden soil, 3 parts of river sand and 1 part of base fertilizer can be used. Base fertilizer can use mature bean cake fertilizer, peanut cake fertilizer and so on.

It should be noted that the suitable temperature for rubber tree growth is 2530 ℃. If it is lower than 3 ℃ in winter, the leaves will turn yellow and fall off. Therefore, it should be kept indoors in a sunny place in winter and keep the room temperature above 10 ℃. When more than 35 ℃ in summer, the plant should be moved to a cool and ventilated place for maintenance, and timely water spray to cool down. Rubber tree is a plant of Moraceae, the whole plant contains milk. Therefore, it is necessary to apply charcoal powder immediately after each pruning, so as not to flow out too much juice and cause water loss and death.

Rubber tree culture methods and matters needing attention: culture soil: select humus nutrient soil to ensure that the soil is fertile, loose, well drained and slightly acidic. It can be mixed with rotten leaf soil, garden soil and river sand. Watering method: keep the soil moist and avoid stagnant water or drought. As the water demand increases in summer, water should be watered appropriately and water spray should be sprayed on the plants to increase humidity.

What are the culture methods and points for attention of rubber trees?

The growth of rubber trees needs sufficient light, but it is also shade-resistant, so indoor maintenance should be placed near the south-facing window with sufficient light and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and wet basin soil are easy to cause root rot. Family cultivation is generally moved to outdoor maintenance from late April to early October every year, and shade is needed at noon in hot summer.

Summer management: rubber trees are resistant to high temperature and hot sun, but avoid direct sunlight. Keep sufficient moisture and spray more water to meet the needs of air humidity. -Autumn management: move to the lighted windowsill or balcony to keep the basin soil moist, enhance cold resistance, and exercise in outdoor low temperature. -Winter management: not resistant to cold, keep room temperature above 5 ℃, ensure light, moist and dry, avoid rotting roots.

It should be noted that the suitable temperature for rubber tree growth is 2530 ℃. If it is lower than 3 ℃ in winter, the leaves will turn yellow and fall off. Therefore, it should be kept indoors in a sunny place in winter and keep the room temperature above 10 ℃. When more than 35 ℃ in summer, the plant should be moved to a cool and ventilated place for maintenance, and timely water spray to cool down. Rubber tree is a plant of Moraceae, the whole plant contains milk. Therefore, it is necessary to apply charcoal powder immediately after each pruning, so as not to flow out too much juice and cause water loss and death.

How to raise the newly bought rubber tree

1. Temperature rubber trees belong to tropical plants and prefer relatively hot environments. After you buy it, you can put it in a position with an indoor temperature above 22 degrees Celsius. The temperature had better not be lower than 10 degrees Celsius for a long time, otherwise frostbite and other phenomena may occur, which will stagnate the growth and development of the plant. It prefers fertilizers.

2. Rubber trees need regular fertilization. The newly purchased plants should not use high concentration compound fertilizer, but can choose diluted slow release fertilizer and apply appropriate amount according to the actual situation of the plant. Light demand newly purchased rubber trees should be placed in a sunny environment to help them adapt to the new environment. In case of overcast and rainy weather, you can supplement the light with the help of artificial light source to ensure sufficient lighting time.

3. It takes a certain strategy to raise the newly bought rubber tree. First of all, it is necessary to simplify and trim the excess branches and leaves after purchase to ensure that the nutrition of the plant is concentrated in the key parts. For small plants, it is also necessary to stabilize their roots and avoid inclined growth. For the culture environment, rubber trees love the tropics, the first culture should be placed indoors, to ensure that the temperature is above 22 degrees Celsius, to avoid damage caused by low temperature environment.

4. Pruning: trim the newly bought rubber tree properly, spray disinfectant on the wound and place it in a cool and ventilated place. Soil: prepare suitable soil, which requires loose, fertile, good air permeability and strong drainage capacity. Planting: plant the plant to the soil, compact the soil, irrigate the right amount of water, and keep the soil moist.

How to raise rubber trees (breeding methods and matters needing attention of rubber trees)

1. The growth of rubber trees needs sufficient light, but it is also shade-resistant, so indoor maintenance should be placed near the south-facing window with sufficient light and pay attention to air circulation. The overwintering temperature should be kept above 10 ℃. Long-term low temperature and wet basin soil are easy to cause root rot. Family cultivation is generally moved to outdoor maintenance from late April to early October every year, and shade is needed at noon in hot summer.

2. Temperature: keeping the best growth temperature of 20-25 ℃, high temperature in summer and low temperature in winter will affect its growth. Light: rubber trees need plenty of sunlight, but they should be properly shaded from May to September. Fertilization: regular fertilization, reduce the occurrence of markings, keep the leaves bright, can use nitrogen fertilizer, stop fertilization in winter. Pruning: pruning in spring to remove internal bifurcations, inward branches and weak branches, keeping ventilated and transparent.

3. Note: the suitable temperature for the growth of rubber tree is 2530 ℃. If it is lower than 3 ℃ in winter, the leaves will turn yellow and fall off. Therefore, it should be kept indoors in a sunny place in winter and keep the room temperature above 10 ℃. When more than 35 ℃ in summer, the plant should be moved to a cool and ventilated place for maintenance, and timely water spray to cool down. Rubber tree is a plant of Moraceae, the whole plant contains milk. Therefore, it is necessary to apply charcoal powder immediately after each pruning, so as not to flow out too much juice and cause water loss and death.