A list of the contents of this article:

The practice of children's small gyroscope

1. Production steps: prepare the materials for making paper gyroscopes, paper and scissors. Toothpicks and solid glue. First of all, let's cut the paper into long strips 1 cm wide and cut a few more strips for spare. Then prepare a small piece of double-sided glue, circle it and paste it 1 centimeter away from the tip of the toothpick. Then paste the note around the double-sided glue of the toothpick, paste the solid glue at the back, and then roll it tightly on the toothpick.

2, the fastest way to fold paper gyroscope: first prepare three pieces of colored paper, then take a piece of colored paper to fold along the diagonal, and then fold in half along the corner, fold the corners of one side along the horizontal line, and fold two more in this way. Paper top folding method: first fold the paper in half, then fold the paper diagonally, then fold the paper in half, and then fold the paper in half to form a square.

3. First prepare materials, including paper, scissors, toothpicks and solid glue. Next, we need to cut the paper into long strips with a width of 1 cm. Then prepare a small piece of double-sided glue, circle it and paste it 1 centimeter away from the tip of the toothpick. Then paste the note around the double-sided glue of the toothpick, paste the solid glue at the back, and then roll it tightly on the toothpick until the radius is 1 cm thick.

How to make manual gyroscope

Top tools for making milk boxes: paper milk cartons (1 top needs 1), 2 plastic bottle caps of the same size, color markers or crayons, transparent tape steps: cut the four edges of the milk box down from the opening of the milk box, separate the four sides of the milk box, and cut off half the length of each side. Then round the corners at the ends of the four leaves and draw the color pattern you like.

First take out a piece of paper and fold it in half, fold one side to the center line, and fold the other line on the same side to the center line as well.

Joan Joan Education and training 2023-12-10 more than 28 users have adopted TA's answers. I think we can do this by finding a thick wooden stick, sharpening the head with a firewood knife and making it smooth. Chop off the sharpened head, nail a thumbtack, put it on the ground and turn it with your hands. Beat it with branches to make it rotate quickly to complete the production of wooden gyroscopes.

The method of making the top by hand is as follows: the handmade paper of 15x15 folds the cross in half, folds both sides in half to the middle, folds in half along the vertical direction to the middle, folds the small square out of the triangle and presses it down at the other end in the same way. Open and inward press the four triangles to form a small square, fold the two sides of the four small squares to the middle, and flatten the front end of the triangle. Fold the inner triangle outward, and the longest triangle on the outside fold to the middle.

The manufacturing method of the gyro is as follows: method 1: prepare a slightly larger bottle cap, wash it and set aside. Press the bottle cap on the cardboard and use the colored pen to draw a line along the week of the bottle cap. Cut round pieces of paper along the line with scissors. Cut out several other identical pieces of paper in the same way. Glue the pieces of paper between them and stick them together. Draw your favorite pattern on the top with a colored pen. Punch a hole with a piercing needle.

The manufacturing method of the old gyroscope

The manufacturing method of the old-fashioned gyro. Tools / raw materials: square colored paper and toothpick first fold two pieces of square colored paper in half to grow strips, and fold the ends of long strips into triangles in different directions. Then align the center of the two pieces of paper and stack them together, starting with the lower triangle, fold each corner inward in a clockwise direction, and insert the last corner below the first corner.

The old-fashioned gyroscope is made as follows: tool materials: bamboo, veneer, saw, superglue. Production method: (1) first saw a bamboo tube with a diameter of about 5 cm and a length of 5 cm, and dig a small long hole with a width of 0.5 cm and a length of 3 cm. (2) cut a bamboo stick to make a shaft, and then make two round boards out of thin wooden planks. The diameter of the round board is about the same as the circumference of the inner wall of the bamboo tube.

The method of making the gyroscope is as follows: first, the log with a diameter of 5 cm is sawed with a steel saw blade. Then cut the end of the sawed wood evenly into a cone with a kitchen knife, not too sharp at the top, and leave a round face about one centimeter in diameter.