A list of the contents of this article:

What about my world shield?

1. First of all, let's make clear what materials are needed to make the shield: iron ingots and planks. Iron is obtained by digging iron ore into the mine, and wood is obtained by cutting down trees. The iron ore obtained is burned into iron ingots, and the wood is decomposed into planks, requiring at least one iron ingot and six planks.

2, material preparation players need to collect at least 6 boards and 1 iron ingot, these resources can be obtained through excavation and exploration. After going to the workbench to collect, players need to go to the workbench, this is the starting point of all production.

3. Mining with wooden pickaxes to obtain iron ore. Put the raw stone on the workbench and get the furnace. Put the coal mine and iron ore into the workbench to get the iron ingot. Put the iron ingots and planks into the workbench and you will get a shield. First of all, use wooden picks for mining to obtain iron ore.

4. In my world game, shields can help players resist attacks, so how to make shields? Let's take a look at it.

How does my world make a shield?

1. In my World, the shield is made of the following materials: 2 copper ingots, 1 amethyst, 4 wood, 2 leather, 4 iron ore. To make a shield, the player first needs to collect enough material.

2. First get the wood block with your bare hands, then press the "E" key to open the backpack, put the wood block into the left side, and get the plank on the right side. 2 then put four more boards on the left, get the workbench, and put the workbench on the ground.

3. Mining with wooden pickaxes to obtain iron ore. Put the raw stone on the workbench and get the furnace. Put the coal mine and iron ore into the workbench to get the iron ingot. Put the iron ingots and planks into the workbench and you will get a shield. First of all, use wooden picks for mining to obtain iron ore.

4. First of all, let's make clear what materials are needed to make the shield: iron ingots and planks. Iron is obtained by digging iron ore into the mine, and wood is obtained by cutting down trees. The iron ore obtained is burned into iron ingots, and the wood is decomposed into planks, requiring at least one iron ingot and six planks.

How to make a manual shield with a cardboard box

The method of making manual shield with cardboard box is as follows: after the front material is ready, first take out the paper shell prepared in front, spread it flat, put it flat, this is not very critical, otherwise the production will not look good.

The way to make a shield in a carton is as follows: find a large carton, wash it and dry it. Cut off the top and bottom of the carton with scissors to get a rectangle. Fold both sides of the rectangular carton into triangles and secure them with glue or double-sided tape. This is the main part of the shield.

First of all, we must prepare a large enough paper shell, if it is small, it does not matter, you can make a small shield. Then prepare a pair of scissors, a pencil and a set of rulers.

First, fold each corner of the cardboard in half to the central point. Next, fold each corner again toward the previous crease, and then fold the corner in half again so that it faces the crease. Then, continue to fold each corner in the opposite direction. After that, fold the corner inward according to the initial crease.

First of all, let's prepare a piece of paper. Draw two circles on the paper jam. Then stick the paper jam to the edge of the circle. Then prepare a glue stick and cut its head off. Then stick the head of the stick in the middle of the paper. Then we put a piece of tape on the head of the stick.

A course in making shields in cartons

Put the large carton flat on the ground and fold the left edge inward to the center. Then fold the right edge inward to the center, where the shield presents three folded pieces of equal width. Then fold the upper folding sheet inward to the center position.

First of all, we must prepare a large enough paper shell, if it is small, it does not matter, you can make a small shield. Then prepare a pair of scissors, a pencil and a set of rulers.

Find a large cardboard box, lay it flat on the ground, and fold the left edge inward to the center. Then fold the right edge inward to the center position, and the shield presents three folded pieces of equal width.

After the front material is ready, first take out the paper shell prepared in front, spread it flat, put it flat, this is not very critical, otherwise the production will not look good.

Find a large carton, wash it and dry it. Cut off the top and bottom of the carton with scissors to get a rectangle. Fold both sides of the rectangular carton into triangles and secure them with glue or double-sided tape. This is the main part of the shield.