A list of the contents of this article:

How to grow beans

1. Land selection and land preparation: when growing beans, you should choose the soil that drains and breathes. The previous winter, the field was deeply turned over. Sowing: to sow seeds in the field by burrowing. Field management: two days after sowing, herbicide was sprayed, and phosphorus and potassium fertilizer was applied at flowering stage. Pruning method: prune the heart of the beans during flowering to avoid overgrowth.

2. First of all, before planting, you can choose full-grain seeds to bask in the sun, which can improve the growth potential of late soybean. When planting, you can mix seeds with about 0.2% ammonium molybdate or rhizobium (usually 1 kg seed dressing, 20 kg seed). According to the experience of old farmers in rural areas, soybean root nodules formed after seed treatment were much earlier, grew faster, branched early, and seed setting rate and pod number were greatly increased.

3. Tidying up the seedbed: soybeans are very easy to feed, and basically any land can be planted, but if you want high-yield soybeans, you must have more fertile and loose soil. Ploughing as deep as possible can prevent all kinds of insect pests. Sprinkle an appropriate amount of farm manure on the arranged seedbed as base fertilizer.

4. Soil preparation and fertilization: soybeans have strong adaptability, but deep ploughing and soil preparation is needed to improve yield and quality. Deep ploughing helps to prevent voles, and appropriate amount of Bika granule fertilizer and farm manure can be sprinkled as base fertilizer during soil preparation. Sowing and raising seedlings: soybeans can be directly seeded or transplanted. Direct seeding is to drill holes and sow seeds at intervals of 30-50 centimeters per plant. Transplanting needs to raise seedlings on the seedbed, cover the soil after sowing, and wait for germination.

How do soybeans, mung beans and red beans grow?

1. Seed planting: in spring, sow soybeans, mung beans, red beans and other seeds into the soil, a depth of about 5 cm, and then cover with a thin layer of soil. Growth management: water the seeds regularly, keep the soil moist, apply fertilizer at the right time, and pay attention to weeding to ensure the healthy growth of seeds. The result: in autumn, legumes produce pods on the tops of legumes. When the pods turn yellow, it is time for harvest.

2. Soybeans are very easy to feed and can basically be planted on any land, but if you want high-yield soybeans, you must have more fertile and loose soil. When making up the seedbed, ploughing as deep as possible can prevent all kinds of insect pests. Sprinkle an appropriate amount of farm manure on the arranged seedbed as base fertilizer. Sow the seeds of soybeans and sow them in the prepared seedbed, Cinderella. The interval between each plant is about 30cm to 50cm.

3. Mung bean is sown to grow mung bean seedlings from the ground, and mung bean seedlings grow into strong mung bean seedlings, blossom and bear fruit, which is about 10 centimeters long, and is transformed from green fruit to black mung bean fruit. At this time, mung bean is ripe and harvested, and the fruit is dried in the sun. The new mung bean is removed from the shell, and the mung bean is broken out from the mung bean shell.

4. This is the growth process from red bean seeds to red bean seedlings. From this growth record, I understand that everything needs human love. Mung bean September 29, 2012 Saturday Weather: sunny Today, the Chinese teacher assigned an assignment, that is: write an observation diary. I decided to observe how mung beans turn into bean sprouts.

5. Mung beans are the easiest to sprout, while soybeans are relatively stubborn, sprouting very slowly and very small, it is said that the soybeans we buy are not very fresh. Black beans can also sprout, and it is more difficult to sprout.

The method of growing beans

Land selection and land preparation: to grow beans, you should choose the soil that drains and breathes. The previous winter, the field was deeply turned over. Sowing: to sow seeds in the field by burrowing. Field management: two days after sowing, herbicide was sprayed, and phosphorus and potassium fertilizer was applied at flowering stage. Pruning method: prune the heart of the beans during flowering to avoid overgrowth.

First, the first is to choose the seeds of soybeans, the quality of seeds determines the quality and quantity of soybeans in the later stage. Here, it is recommended to choose soybeans that have been planted last year, and choose full, dry soybeans. Soybeans in the process of sowing, will put several seeds in a hole at the same time, there is no need to worry about seed germination, even if one or two seeds do not germinate, there will always be one seed will germinate.

Land selection and soil preparation: soybean is suitable to grow on the land with fertile soil, normal drainage and irrigation and no diseases and insect pests, which can effectively increase the yield of soybean. Variety selection: there are many varieties of soybeans, which should be selected according to the actual situation of the soil, environment and other factors. Timely sowing: sowing sowing methods should be adjusted according to different varieties, such as strip sowing for early-maturing varieties and hole sowing for late-maturing varieties.

Make up the seedbed: soybeans are very easy to feed and can basically be planted on any land, but if you want high-yield soybeans, you must have more fertile and loose soil. Ploughing as deep as possible can prevent all kinds of insect pests. Sprinkle an appropriate amount of farm manure on the arranged seedbed as base fertilizer.

Beans are planted like this: pick beans, sow beans, sprout, prepare soil, and sow seeds. Pick beans before growing beans, first pick out the right beans, common beans at home can be used to grow, such as soybeans, mung beans, black beans and so on. Choose good beans with full grains, healthy and full, free from diseases and insect pests, and get rid of the dried and bad beans. If you plant them with bad beans, the germination rate may be affected.

How to grow beans

Land selection and soil preparation: soybean is suitable to grow on the land with fertile soil, normal drainage and irrigation and no diseases and insect pests, which can effectively increase the yield of soybean. Variety selection: there are many varieties of soybeans, which should be selected according to the actual situation of the soil, environment and other factors. Timely sowing: sowing sowing methods should be adjusted according to different varieties, such as strip sowing for early-maturing varieties and hole sowing for late-maturing varieties.

Soak beans and sow seeds: soak the beans in water for about 12 hours, then transfer them to a plastic box and cover them with water-moistened cotton gauze or paper towels. Storage environment: put the plastic box in a warm, ventilated place with proper light. Management and nursing: keep the bean sprouts moist every day and sprouts can grow after about a few days. Material preparation to choose healthy beans is the key.

Beans are planted like this: pick beans, sow beans, sprout, prepare soil, and sow seeds. Pick beans before growing beans, first pick out the right beans, common beans at home can be used to grow, such as soybeans, mung beans, black beans and so on. Choose good beans with full grains, healthy and full, free from diseases and insect pests, and get rid of the dried and bad beans. If you plant them with bad beans, the germination rate may be affected.

Make up the seedbed: soybeans are very easy to feed and can basically be planted on any land, but if you want high-yield soybeans, you must have more fertile and loose soil. Ploughing as deep as possible can prevent all kinds of insect pests. Sprinkle an appropriate amount of farm manure on the arranged seedbed as base fertilizer.

Five steps to growing beans

Sowing and sowing, the best time to plant beans is in spring, flatten the soil in the flowerpot, sow the sprouted beans into the soil and cover them with a thin layer of soil. Pour water into the soil, then put it in a sunny but not strong place and wait for the beans to sprout.

Step 1: choose and buy seeds. You can buy beans at your local garden store or on the Internet to ensure that the seeds you buy are suitable for your planting area and time. Step 2: prepare the soil. Beans need to grow in an environment with rich soil and good drainage. You need to choose the soil suitable for beans to grow and sprout, and the soil should be softened in spring. Step 3: plant seeds.

Step 1: choose a container for your child to choose a transparent glass or plastic cup as a planting container, so that they can clearly observe the growth process of soybeans. Step 2: soak the beans and soak the beans in clean water for about 8 hours. Let the children participate in this step and learn about the beans to be planted. Step 3: lay a layer of paper towels or cotton balls on the bottom of the cup to keep the seeds moist.

Land selection and land preparation: to grow beans, you should choose the soil that drains and breathes. The previous winter, the field was deeply turned over. Sowing: to sow seeds in the field by burrowing. Field management: two days after sowing, herbicide was sprayed, and phosphorus and potassium fertilizer was applied at flowering stage. Pruning method: prune the heart of the beans during flowering to avoid overgrowth.

The method and process of growing beans

Make up the seedbed: soybeans are very easy to feed and can basically be planted on any land, but if you want high-yield soybeans, you must have more fertile and loose soil. Ploughing as deep as possible can prevent all kinds of insect pests. Sprinkle an appropriate amount of farm manure on the arranged seedbed as base fertilizer.

Land selection and land preparation: to grow beans, you should choose the soil that drains and breathes. The previous winter, the field was deeply turned over. Sowing: to sow seeds in the field by burrowing. Field management: two days after sowing, herbicide was sprayed, and phosphorus and potassium fertilizer was applied at flowering stage. Pruning method: prune the heart of the beans during flowering to avoid overgrowth.

There are two ways of sowing soybeans, direct seeding and transplanting, that is, as mentioned just now, it is good to drill holes in each plant at an interval of 30 to 50 centimeters. If we transplant, we must first raise seedlings on the seedbed, wet the seedbed before sowing, then sow the seeds, cover the seeds with soil, and then wait for them to germinate. When the bean seedlings grow to four or five centimeters, they can be transplanted at the same interval as the direct seeding.

Land selection and soil preparation: soybean is suitable to grow on the land with fertile soil, normal drainage and irrigation and no diseases and insect pests, which can effectively increase the yield of soybean. Variety selection: there are many varieties of soybeans, which should be selected according to the actual situation of the soil, environment and other factors. Timely sowing: sowing sowing methods should be adjusted according to different varieties, such as strip sowing for early-maturing varieties and hole sowing for late-maturing varieties.

Beans are planted like this: pick beans, sow beans, sprout, prepare soil, and sow seeds. Pick beans before growing beans, first pick out the right beans, common beans at home can be used to grow, such as soybeans, mung beans, black beans and so on. Choose good beans with full grains, healthy and full, free from diseases and insect pests, and get rid of the dried and bad beans. If you plant them with bad beans, the germination rate may be affected.

Soil preparation and fertilization: soybeans have strong adaptability, but deep ploughing and soil preparation is needed to improve yield and quality. Deep ploughing helps to prevent voles, and appropriate amount of Bika granule fertilizer and farm manure can be sprinkled as base fertilizer during soil preparation. Sowing and raising seedlings: soybeans can be directly seeded or transplanted. Direct seeding is to drill holes and sow seeds at intervals of 30-50 centimeters per plant. Transplanting needs to raise seedlings on the seedbed, cover the soil after sowing, and wait for germination.