A list of the contents of this article:

Processing method of gourd

Do-it-yourself gourd processing methods are as follows: prepare a fresh gourd, some weight is the best. Put it in the water and boil it for a while. Put the gourd in when the water is cold. Boil the water for 5 minutes, remove it and dry.

Draw patterns: clean gourds can be decorated by drawing patterns. You can use paints, pens and other tools to draw your favorite patterns and patterns on the surface of the gourd. Carving gourd: if you want to make more exquisite gourd handicrafts, you can consider carving.

Material selection. Choose exquisite sub-waist gourd, small and exquisite egg gourd, rather clumsy pimple gourd and so on. Raw material processing. Scraping the gourd, scraping the surface of the gourd with an uncut knife; washing the gourd, washing the scraped gourd with warm water; pressing the gourd, scraping and pressing the surface of the gourd with an unbladed knife.

Cut a 120-degree circular cloth, that is, divide a circular cloth into three equal parts. The radius of the circle determines the size of the gourd. Tie a knot in the middle of the red silk rope fold, turn the cloth face to face, and sew one end of the thick rope with the cloth. Turn back to the front. Bottom flanging stitching.

The method of making gourd mold is as follows: if you want to get a round gourd, you must find a round plastic ball. Prepare a knife. Make a cut in the ball with a knife and split the ball in two. Gouge out a hole in the top of the ball with a knife and cut another hole from the hole to the edge.

How to deal with the newly picked gourd? I want to hold the wine!

Boil it in water for a while, put the gourd in when you use cold water, boil it for about 5 minutes, then fish it out and dry it. Cut off the outermost thin skin of the gourd with a knife.

The method of making wine pot with gourd is as follows: select gourd: first select rare's sub-waist gourd, hollowing out the seeds and flesh, which can be used to hold wine after drying. The gourd used to make a wine pot had better be the earliest to hang fruit on a gourd. Such a gourd is thicker and not easy to damage.

Choose a gourd that is beautiful, healthy and of the right size. after air-drying, the flesh inside will naturally loosen. Make a small cut of the gourd and pour out the flesh. After pouring out the flesh, soak the inside of the gourd with activated carbon and water for several hours to remove the smell, then air-dry, and after the wine gourd is dried, it can be loaded into the wine.

How to deal with the gourd can be filled with wine gourd is to replace the wine bottle, easy to carry, not easy to break. It is not suitable for long-term storage of liquor. Long-term storage of liquor still needs to use glass bottles, clay jars and so on. Pull off a small opening at the top of the gourd, remove the seeds and flesh inside, and rinse with clean water.

Manufacturing method of Gourd Mould

1, in the model of the gourd, the need to choose basically the same size, mature gourd, peeling treatment. Then, according to the shape of the mold, the model template is tightly tied to the gourd, and then the gourd is bound to the gourd with paper tape and Kraft paper. After drying, the gourd with the shape of the mold is finally obtained.

2. Make the mold. Use packaging foam to make a mold, a simple mold can be made by yourself, if you need a more exquisite one, it is recommended to find a sculptor to do one. When the gourd grows to 20 centimeters, put it in the mold. Merge the moulds and tie them with thread. The next step is to wait for the gourd to grow up naturally.

3. The production method is to wrap the young gourd into the Yin model engraved with all kinds of patterns, and with the growth of the gourd, gradually fill the space in the model, and take it out after the gourd is made into wood. The Yin engraving of the model is displayed in Yang on the gourd.

Making method of gourd by hand

Cut the color card into N colorful squares (using squares with sides 15 centimeters long, each paper cut out four small squares, a total of 12 squares). Square paper jam, see the picture below. Fold in half, as shown in the following figure.

Prepare paper, bamboo sticks and pruning tools for materials. It is recommended to choose a less thick color paper jam or wrapping paper. Make the gourd body to fold the rectangular paper twice in proportion to four times the length, and then fold it diagonally to a 70% discount.

First, a red jade thread is used to make a ring at the end of the line. Then use the middle of another red rope to make a sparrow knot in the overlapping part, and then use one of the thread to make a sparrow knot next to it.

The folding course of gourd is as follows: tool preparation: a piece of square paper. The first step: fold the square paper diagonally twice, and then fold the opposite side twice. When folding, the edges and edges must be aligned.

Illustration of the making method of cloth gourd

The drawing needs to be in the shape of a circle and a fan of 3 circles. (method: draw a circle, draw a circle at any point of the circle, draw a circle with the same radius, and connect the two points on the intersection of the center point and the arc to get a fan shape of 1 hand and 3 circles. Cut the paper pattern and sample it on the cloth. The radius 11cm is taken in the figure.

Cut a 120-degree circular cloth, that is, divide a circular cloth into three equal parts. The radius of the circle determines the size of the gourd. Tie a knot in the middle of the red silk rope fold, turn the cloth face to face, and sew one end of the thick rope with the cloth. Turn back to the front. Bottom flanging stitching.

Glue step: first, make sure the gourd is clean and dry. If there is any dirt or dust in the gourd, wipe it gently with a damp cloth. Next, decide the use of the gourd. You can choose to use it as an ornament, or you can make it into a pendant or pendant.

Step 1: prepare the material first, we need to prepare some paper, the color can be chosen according to personal preference. It is recommended to use colorful paper to increase the beauty of the gourd. Step 2: draw the pattern and draw the shape of the gourd on the paper.

Production steps: prepare materials and tools. Fold the line in half and weave the circle symmetrically with the sparrow head. After the two circles are all covered with sparrow head knots, the remaining thread is turned back to weave 3 snake knots, and the tail thread is strung with 3 beads each, tied with a flat knot and tightened. Cut off the excess thread and burn the thread foot with a lighter to finish.

Fold over, as in the above step, fold the second ear. Repeat the first step when folding the first ear. Pick it up. There's a hole in it. See? Take one ear in each hand. Don't take the adjacent ones, take the opposite ears. Blow into that hole. Keep blowing up the gourd.